How the temperature display water bottle works
A sensor in the lid measures the temperature of your drink, and the LED display shows the number, accurate to about ±1 °C. You never have to open the bottle to guess. That is handy when you have just filled it with boiling water for tea, or when you want to know whether the coffee is cool enough to sip on the drive.
Battery life of the LED lid
The display runs on a button cell that lasts around 12 to 18 months, depending on how often you check it. After that, simply swap in a new button cell.
Vacuum insulation inside the bottle
Between the two stainless steel walls is a vacuum that cuts heat exchange by around 95 per cent. That is why a hot drink made at breakfast is still hot in the afternoon and cold drinks stay cold all day with ice, depending on preheating.
Smart water bottle with LED temperature display for tea and coffee
A smart water bottle with LED temperature display takes the guesswork out of brewing on the go. Fill it with boiling water in the morning and pour at the right moment for your tea later. It is also a quick check for parents who want to be sure a drink is not too hot before handing it to a child.
Out on a bushwalk or a camping trip, the display also tells you whether your hot water is still hot enough for a cup of tea or an instant noodle cup, before you open the lid and let the heat escape.
-
Green tea: wait until the water has dropped to roughly 70 °C.
-
Coffee on the go: see when it is cool enough to drink without burning your tongue.
-
Iced water: check it is still cold after hours at the beach or the park.
Getting the most from your temperature display water bottle
- Fill the bottle with boiling water for 2 minutes to pre-heat it, then tip it out.
- Pour in your hot drink and close the screw lid firmly.
- For cold drinks, pre-chill with cold water and a few ice cubes.
- Check the display whenever you like, without opening the lid.
Sparkling water in summer, tea in winter
Because the bottle handles carbonated drinks, you can fill it with sparkling water in summer just as easily as with tea in winter. The silicone seal keeps it tight even when the bottle lies flat in a backpack.
Is a 500 ml temperature display water bottle enough for you?
For many people, 500 ml is the most versatile size for daily life. For coffee or tea, it is about two large cups, which covers a morning. For water, it is a good amount for a few hours at work or on an outing, with a refill at a tap later. If you drink a lot through the day, a larger bottle may suit you better.
Many people use the bottle for two jobs a day: hot coffee or tea in the morning, then a rinse and cold water for the afternoon. Thanks to the stainless steel inside, flavours do not linger once you have rinsed it, so the water tastes fresh.
Where the bottle fits
The 500 ml size slips into most handbags, the side pocket of a backpack and many car cup holders. The non-slip finish helps it stay put on a desk or a car console.
Yellow drink bottle, blue, green or pink
There are four colours. The yellow drink bottle is bright and cheerful, easy to spot in a full school bag or a crowded staff fridge. Green and pink add a fresh, friendly touch, and they are easy to tell apart in a family with more than one bottle.
Blue stainless steel water bottle for a classic look
If you want something calmer, the blue stainless steel water bottle is the classic choice. It looks smart on an office desk and hides everyday wear well.
Cleaning the bottle and the display lid
Wash the bottle with warm water and a little dish soap, using a bottle brush to reach the bottom. The lid holds the sensor and display, so wipe it with a damp cloth rather than soaking it. Leave everything open to dry before you close the bottle again.
Looking after the silicone seal of the lid
The silicone seal is what keeps the bottle leak-proof, so give it a little attention. Every week or so, take it out, rinse it in warm soapy water and let it dry before fitting it back. Check it sits flat and even in its groove. A clean seal also stops coffee or juice smells from building up around the thread.
Compare other bottles with a temperature display
If you like the idea but want a different style, compare the digital thermos, which comes in eight colours, and the thermometer water bottle. For a larger option, see the thermos with temperature display. The full range is in the Smart water bottle collection.
Specifications of the temperature display water bottle
| Feature |
Detail |
| Capacity |
500 ml |
| Material |
stainless steel, double wall, vacuum insulated |
| Display |
digital thermometer with LED screen in the lid, about ±1 °C |
| Power |
button cell, about 12 to 18 months |
| Hot |
Breakfast to afternoon (preheated, filled full) |
| Cold |
all day with ice |
| Lid |
screw lid with silicone seal |
| Colours |
yellow, blue, green, pink |